File Name: traffic road signs and their meanings .zip
Road signs play a huge role in making Ireland a country with safe roads.
Road signs play a huge role in making Ireland a country with safe roads. Learners who plan to take up a driving test and get licensed are expected to recognise a befitting percentage of these signs if they want to come out successful with the test.
On a general note, Road signs are divided into four broad aspects. They are Regulatory road signs, warning road signs, information road signs, and motorway road signs. No matter how safe a road may look, you can always expect to meet up with a sharp corner, which is a potentially dangerous road configuration.
The road sign of a dangerous corner is in the form of a right angle pointer. Usually, it points in the direction to which the bend in question heads.
This will help road users have an idea which side of the road the bent is tilted to and how sharp it is. Whenever you see a warning sign of this nature, it is best for you to drop down the speed of the vehicle and pay more than usual attention to the road configuration; driving accordingly.
Roundabout ahead: roundabouts are an integral part of roads in many countries. Ireland is not an exemption. There are roundabouts even in rural areas and in highbrow areas, we have complex road structures which include roundabouts. A roundabout warning sign usually comes in the form of three round pointers that gives them a general look of a circle of the same diameter. Therefore, it is expected that you drop your speed and anticipate the situation you are going to encounter getting to the roundabout.
Mini roundabout: this is quite different from the type of roundabout earlier described, the size of a roundabout is very important to the attitude of the driver plying the road it determines the attitude of drivers on the road. Hence, in addition to identifying a roundabout warning sign on the road, it is vital that you have an idea of how big it is.
A mini-roundabout warning sign has a dot in the middle, then surrounded by three curved lines towing the same diameter, making it look like a circle with three broken lines. However, the curved lines are with small arrows or pointers as described in the main roundabout warning sign. Once you see something of this nature, you can expect to meet a not-so-busy roundabout. However, you still want to be careful and reduce your speed as you approach it.
Merging traffic: in busy areas, you get to see two busy roads merging in a slanted format. You get to see that it is not really a T junction. Usually, the receiving lane is a one-way lane.
Once you are about to get to a road with this configuration, it is always vital to slow down your speed. However, many drivers feel this is not a junction; hence, they tend to just transit at the same speed level.
That is why you get to see a warning signal for roads of this configuration so drivers can be mindful of their speed as they approach merging traffic. Two-way traffic: this can also be known as a double lane. It is not uncommon to see two standard roads side by side, demarcated with a constructed concrete ridge that houses large street lamps in Irish cities. When you are approaching a road of this configuration, you get to see a warning sign of two arrows lying side by side but pointing in different directions.
On seeing this, drivers are expected to configure their minds to comply with the rules associated with driving on roads with this configuration. For example, they should know when they need to be on the fast lane or slow lane.
Again, they want to exercise caution in transiting from a fast to a slow lane or vice versa. The difference is that one being a bend and the other being a corner. While a corner is quite gentle in its diversion, a bend is way Swiffer. For a dangerous bend, its sigh looks exactly like a gently bending arrow.
In essence, you want to exercise a more significant deal of patience when approaching a dangerous corner. In the case of a bend, you want to be careful too by dropping your speed while you ply the bending part of the road. Series of dangerous bends ahead: some road configuration can be really complex. You find roads like this in areas with rough topography, such as undulating mountains that are sometimes characterised by clumsy water bodies.
In cases like this, road designers are usually short of options in their quest to deliver easily navigable roads. This gives birth to a set of dangerous bends. It is not uncommon for roads like this to be accompanied by multiple bumps.
This is usually done in a bid to force reckless drivers to drop their speed while they navigate the bends. Restricted headroom: some axis or areas are mindful of the type of vehicle allowed into them.
Most of the time, reasons for this restriction might be road capability or even security in some cases. For roads like this, you get to see road signs, including the specific height of restricted vehicles, if your vehicle is a bit longer than the benchmark height; you are likely to be met with some sort of restriction.
Most times, a barricade that prevents the unwanted category of vehicle is built at the entrance of such roads. T-junction: this road type is quite common. It is found both in rural areas and urban centers. It is usually the transition of a less busy road to a major highway. This is indicated in the warning traffic sign as it is often a short thin vertical line meeting with a longer horizontal line that is visibly thicker. Series of dangerous corners ahead: the look of this warning sign is terrifying.
Often the situation on the ground is just as dangerous as this sign suggests. The construction story is similar to that of dangerous bends as mentioned earlier. Also, it is not uncommon for roads like this to be accompanied by bumps. With that in mind, we present the full list of road signs seen in Ireland and the categories they fall under.
You already know this is the most crucial to your safety when driving. As the name implies, they are meant to warn you of approaching dangers. They are arranged into a few subcategories for better understanding. Hazards ahead: as mentioned earlier, they are used to warn road users of an incoming danger.
Regulation signs are road signals that require a driver to obey a specific order. They are also called traffic control signage. This is basically the most important signage category for drivers who are new in town as they serve as guide for them not break traffic rules that could attract stiff sanctions.. Traffic lane control signs: this category of regulatory traffic signs is useful in tunnels, national roads and motorways.
Usually in rectangular forms, they provide guidance and information for drivers; helping them explores interstate roads without having to ask passersby, pedestrians, or fellow road users for directions.
These are signs that are basically aimed to help drivers have an idea of the road type they are on to and what type of road to expect a few meters away. Let's Go! Road Signs Ireland. What To Do Now? If you have a questions regarding your driving lessons, choice of instructor in your area or need help in choosing the right driving school make sure to contact our dedicated driving education support team. Highly recommend Ladybird Driving School.
Ladybird Driving School.
Toggle navigation All-free-download. Road traffic signs and meanings pdf Free vector We have about 9, files Free vector in ai, eps, cdr, svg vector illustration graphic art design format. Almost files can be used for commercial. Traffic signs collection colored flat shapes. Traffic signs templates colored classical flat design. Traffic signs templates modern colored flat shapes. Traffic signs collection shiny modern colored circle design.
time to time, so drivers or riders who passed their driving test a few years ago Some crossings have flashing red road traffic signals; these mean. STOP (and.
New drivers and riders must learn Highway Code traffic signs to pass the driving theory road signs test section. As a rule, a triangular road sign gets used to warn drivers to use extra caution ahead. Check these driving test theory FAQs motorists also ask about Reversing for a longer period of time or distance than necessary endangers other motorists and can create dangerous situations for pedestrians.
Skip to search form Skip to main content You are currently offline. Some features of the site may not work correctly. Zhang and A. Zhang , A. Chan Published Computer Science. Traffic signs are effective only when users clearly understand their meaning. This paper reviews recent studies concerning traffic sign comprehension and finds that unsatisfactory comprehension is a common problem for drivers in many countries.
Warning signs in Philippines are often red or yellow to advise of potential danger. You should take note of any warning signs in Philippines as they are designed to alert you of possible dangers ahead. Information signs in Philippines are the most frequently used road signs in Philippines and are generally used on any type of road to provide road users with general information about the road they are using and the road ahead. Mandatory road signs in Philippines are used where you are required to carry out a specific task, they are not suggestions, information or advisory signs, they must be adhered to and as such are arguably the most important roads signs in Philippines that you need to know. If driving in a country where you drive on the other side to the road, priorities are likely to the opposite of what you are familiar with, roundabouts being a notable difference. Prohibitory road signs in Philippines are used on all road types in Philippines, often to restrict certain types of vehicles and certain manoeuvres such as prohibiting u-turns or setting maximum speeds.
Note: Although The Highway Code shows many of the signs commonly in use, a comprehensive explanation of our signing system is given in the Department's.
Your email address will not be published. Required fields are marked *